About the Equipment
- 压力压缩机（外尺寸：18*18*110cm）
- 气水分离器（尺寸4*4*15cm）
- 泥仓（外形尺寸：31*31*48cm）
- 模具（每块模具尺寸35*35*2cm）
- 压力计（100PA）
- 脚踏板（自带3米长气压管子）
- 可移动支架（外尺寸71*71*215cm），支架底部配带滑轮可以自由拖动
- 尺寸：71*71*215cm
- 重量：95KG
特征：
- 可快速、简单的拆装泥仓
- 可自由更换模具形状，并流畅的挤出各种形状的泥条，机器自带7套成型模板，使用者也可自己DIY制作设计异形模板
- 挤压的过程无需手动，泥巴可自动下压，同时可自己控制挤压速度
- 由空气压缩装置带动，气压连接脚踏板控制，提供压力高至150磅的压力（一般挤泥条机提供85到125磅）
配置：
System-3配有压缩机、气水分离器、泥仓、模具、压力计、脚踏板、可移动支架。支架底部配带滑轮可以自由拖动。
- Pressure compressor (outer size: 18*18*110cm)
- Air-water separator (size 4*4*15cm)
- Mud bin (outer size: 31*31*48cm)
- Mold (each mold size 35*35*2cm)
- Manometer (100PA)
- Foot pedal (with its own 3-meter long air pressure tube)
- Moveable bracket (outer size 71*71*215cm), the bottom of the bracket with pulleys can be freely dragged
- Size: 71*71*215cm
- Weight: 95KG
Features:
- Can quickly and easily disassemble the mud bin
- Free to change the shape of the mold, and smooth extrusion of various shapes of clay bars, the machine comes with 7 sets of molding templates, the user can also make their own DIY design shaped templates
- No need to manually squeeze the process, the mud can be automatically pressed down, and at the same time, you can control the extrusion speed.
- Driven by an air compressor and controlled by a foot pedal, it delivers up to 150 pounds of pressure (typical clay bar extruders deliver 85 to 125 pounds).
Configuration:
The System-3 is equipped with a compressor, air/water separator, mud bin, mold, manometer, foot pedal, and removable stand. The bottom of the stand is equipped with pulleys for free towing.