拉坯机

- 马达: 100W DC 1/3 HP 单相
- 驱动系统: DC 马达 皮带轮传动
- 最大载泥量: 9KG
- 转盘转速: 0~230转/分
- 速度控制器: 脚踏板操作
- 转盘旋转方向: 正反转皆可
- 转盘: 塑料, 直径: 230mm
- 外观尺寸: W370×L500×H250(mm)
- 重量: 11kg
- 附赠: 1个挡泥板, 2个转盘

特性和说明：
1. 外观尺寸: 不大于 W370×L500×H250(mm) 便携式
2. 转盘旋转方向以及速度控制：转盘转速: 0~230转/分钟。通过脚踏板同步控制转盘转速或通过手摇杆同步控制转盘转速。正反转皆可。转盘旋转状态下调整正反转旋钮后，需脚踏板或手摇杆控制速度降为0之后，再开启速度时转盘转动方向改变，确保安全使用。
3. 重量: 不大于11kg
4. 设备附件: 1个挡泥板, 2个高强度ABS塑料材质转盘。转盘固定方式为固定桩锁扣式，不需固定螺丝，容易拆卸，以便于完成拉坯作品后更换转盘。
5. 整机噪音：运转时声音小于55分贝
6. 可拆卸挡泥盘连接密封，不漏泥浆，干净卫生易打扫。

- Motor: 100W DC 1/3 HP single phase
- Drive System: DC Motor Pulley Drive
- Maximum load capacity: 9KG
- Rotary speed: 0~230 rpm
- Speed controller: Foot pedal operated
- Direction of rotation: Forward and Reverse
- Turntable: Plastic, Diameter: 230mm
- Dimension: W370×L500×H250(mm)
- Weight: 11kg
- Included: 1 fender, 2 turntables

Characteristics and description:
1. Appearance size: not larger than W370×L500×H250(mm) portable
2. Turntable rotation direction and speed control: turntable speed: 0~230 rpm. Synchronized control of turntable speed by foot pedal or hand crank. Forward and reverse rotation is available. After adjusting the forward and reverse knob under the rotating state of the turntable, you need to control the speed by foot pedal or hand crank to reduce it to 0, and then the direction of the turntable rotating will be changed when the speed is turned on again to ensure the safety use.
3. weight: not more than 11kg
4. Equipment accessories: 1 fender, 2 high-strength ABS plastic turntable. Turntable fixing method is fixed stake locking type, without fixing screws, easy to dismantle, in order to replace the turntable after completing the work of pulling blanks.
5. Noise: less than 55dB when running.
6. Removable fender plate connection seal, no mud leakage, clean and hygienic easy to clean.