喷釉柜

- 框架材质: 不锈钢+玻璃
- 额定电压: 220V
- 电机转速不低于: 1500转
- 电机功率不低于: 150W
- 风机功率不低于: 0.12KW
- 风机风量不低于: 2000m³/H
- 水泵功率不低于: 0.125kw
- 转盘材质: 铝合金
- 转盘转速: 0-200转/分
- 喷釉用具三件套空压机: 额定电压: 220v；排气量不小于: 60L/min；储气罐: 不低于18L
- 不堵塞喷釉壶: 容量不少于: 450ml；材质: 铝；工作气压: 0.3-0.4（mpa）；喷涂距离: 200mm；喷洒面积: ≥30mm
- 100目釉筛: 1个
- 施釉防护口罩: 2个
- 手持式搅拌机: 1个
- 釉夹: 1把
- 100ml、200ml、300ml吹釉壶: 各1个
- 石膏板: 2块

- Frame material: stainless steel + glass
- Rated voltage: 220V
- Motor speed not less than: 1500rpm
- Motor power not less than: 150W
- Fan power not less than: 0.12KW
- Fan air volume not less than: 2000m³/H
- Water pump power not less than: 0.125kw
- Turntable material: aluminum alloy
- Rotor speed: 0-200rpm
- Glaze spraying utensils three-piece air compressor: rated voltage: 220v; exhaust volume not less than: 60L/min; air tank: not less than 18L
- Non-clogging glaze spray pot: capacity of not less than: 450ml; material: aluminum; working air pressure: 0.3-0.4 (mpa); spray distance: 200mm; spray area: ≥ 30mm
- 100 mesh glaze sieve: 1pc
- Glazing protective mask: 2pcs
- Handheld mixer: 1
- Glaze clamp: 1
- 100ml, 200ml, 300ml glaze blowing pot: 1 each
- Gypsum board: 2 pieces