About the Equipment
- 输入电压: AC220V
- 出泥口直径: 70mm
- 总功率: 1.65KW
- 螺旋片送料轴转速: 0～35r/min 无极变频调速
- 抽真空度: -0.085Mpa
- 练泥产量: 0～270KG/H
- 外观尺寸: 920(1,320包含托泥板)×420×750mm
- 重量:
- 主体: 140kg
- 托泥板: 5kg
- 主马达: 单相 230V, 600W
- 真空泵马达: 单相 230V, 400W
- 出泥能力: 200kg/小时
- 练泥轴:
- 混泥箱: 双练泥轴
- 出泥口: 单练泥轴
- 练泥轴材质: 不锈钢
- 练泥箱材质: 不锈钢
- 出泥口径: 90mm
要求/特点:
- 外观尺寸不大于920(1,320包含托泥板)×420×750mm
- 重量不大于145kg
- 主马达不大于单相 200～240V, 400W
- 真空泵马达不大于单相 200～240V, 250W
- 出泥能力不小于200kg/小时
- 出泥口径不小于90mm
- 真空负压值0.09Mpa（70cm/Hg）以上；真空度不小于90%。
- 机器配有安全断路器
- 整机必须采用全封闭设计，主马达和真空泵马达不外漏。安全、噪音低、小巧、占用空间小。
- 机身底部必须配置带锁定功能的滑轮，方便移动。
- 投泥口必须带有安全童锁装置，电源开启时打开投泥口，机器能够自动停止，有效防止操作人员或学生在机器运转时头发、衣服、围巾、手等异物的卷入导致的人身安全问题。
- 真空泵马达必须采用免维护加油的润滑脂，不需要用润滑油，能够有效防止机器抽真空时润滑油倒灌漏油，导致人员或学生接触、误食。
- Input voltage: AC220V
- Diameter of mud outlet: 70mm
- Total power: 1.65KW
- Rotating speed of spiral blade feeding shaft: 0~35r/min Frequency conversion speed control
- Vacuum degree: -0.085Mpa
- Output: 0～270KG/H
- Appearance size: 920(1,320 including pallet)×420×750mm
- Weight: Main body: 140kg
- Main body: 140kg
- Weight: Main body: 140kg Clay pallet: 5kg
- Main motor: Single-phase 230V, 600W
- Vacuum pump motor: Single phase 230V, 400W
- Capacity: 200kg/hour
- Mud drill shafts: 1-phase, 230V, 400W
- Mixing box: Double practice shaft
- Mud outlet: Single shaft
- Shaft material: stainless steel
- Mud box material: stainless steel
- Mud outlet caliber: 90mm
Requirements/Features.
- External dimensions not larger than 920 (1,320 including pallet) x 420 x 750mm.
- Weight not more than 145kg
- Main motor not larger than single-phase 200～240V, 400W
- Vacuum pump motor not larger than single-phase 200～240V, 250W
- Mud discharge capacity not less than 200kg/hour
- Discharge caliber not less than 90mm
- Vacuum negative pressure value 0.09Mpa (70cm/Hg) or more; vacuum degree not less than 90%.
- The machine is equipped with safety circuit breaker
- The whole machine must be fully enclosed design, the main motor and vacuum pump motor do not leak out. Safe, low noise, compact and occupies little space.
- The bottom of the machine must be equipped with pulleys with locking function for easy movement.
- The mud throwing port must be equipped with a safety child locking device, when the power is turned on to open the mud throwing port, the machine can automatically stop, effectively preventing the operator or students in the machine running hair, clothes, scarves, hands and other foreign objects involved in the personal safety problems caused by.
- Vacuum pump motor must use maintenance-free oiling grease, do not need to use lubricating oil, can effectively prevent the machine vacuum lubricant backflow leakage, resulting in personnel or students contact, accidental ingestion.